Forging product of the KOGAX
Merit by forging
Resource saving
| I can decrease the materials weight in comparison with cutting (saving of the material)
|
Improvement of the productivity
| I can shorten the processing time in comparison with cutting
|
Improvement of materials properties
| Strength improves in a fiber-formed organization and is improved the mechanical property
(effect due to the processing hardening by cold forging) |
I can mold it and am
Processing load | Press of 80t - 630t |
Materials
Low carbon steel (S10C - S45C, SCM415)
| Cold forging
|
Aluminum 4300 system, 6000 system
| Forging, cold forging between the heat
|
Copper C1020
| Cold forging
|
Stainless steel SUS304, 430
| Cold forging
|
Copper (pure copper, brass)
Materials: C2700 (brass)
An outline: φ20 X φ 30
Contents: Cold forging brass case
A point: Reduction of the cold forging material cost of the brass
An outline: φ20 X φ 30
Contents: Cold forging brass case
A point: Reduction of the cold forging material cost of the brass
Steel
Materials: SCM415
An outline: φ 20
Contents: Cold forging spiral bevel gear
A point: Forging of the spiral gear
An outline: φ 20
Contents: Cold forging spiral bevel gear
A point: Forging of the spiral gear
Materials: SCM415
An outline: φ15 X 30
Contents: Cold forging spiral pinion gear
A point: Forging of the spiral gear
An outline: φ15 X 30
Contents: Cold forging spiral pinion gear
A point: Forging of the spiral gear
Materials: SCM415
An outline: φ20 X φ 40
Contents: Cold forging two steps gear
A point: Forging of two steps of gears
An outline: φ20 X φ 40
Contents: Cold forging two steps gear
A point: Forging of two steps of gears
Materials: S25C
An outline: φ20 X 160 - spline length 75
Contents: Spline of cold forging
A point: Long spline
An outline: φ20 X 160 - spline length 75
Contents: Spline of cold forging
A point: Long spline
Aluminum
Materials: A6061
An outline: □30 X 20
Contents: Forging aluminum block between the heat
A point: I cast forging of the three-dimensional shape, and impregnation is not necessary without a nest
An outline: □30 X 20
Contents: Forging aluminum block between the heat
A point: I cast forging of the three-dimensional shape, and impregnation is not necessary without a nest
Materials: A6063
An outline: □30 X 60
Contents: Forging aluminum pressure vessel between the heat
A point: I cast forging of the three-dimensional shape, and impregnation is not necessary without a nest
An outline: □30 X 60
Contents: Forging aluminum pressure vessel between the heat
A point: I cast forging of the three-dimensional shape, and impregnation is not necessary without a nest
Stainless steel (SUS)
Materials: SUS304 SUS430
An outline: φ30 X 16
Contents: Cold forging stainless steel case
A point: Unification of the reduction 2 parts of the material cost
An outline: φ30 X 16
Contents: Cold forging stainless steel case
A point: Unification of the reduction 2 parts of the material cost